2019/07/19 · I wanted to set LCP echo failure threshold to 0 (ignore failures) to see if false faulures were being detected, but found that a '0' value is ...
関連する質問
What is an LCP error?
What is the LCP echo interval?
The lcp-echo-interval is the time in seconds between echo requests (when the link "appears" to be idle). lcp-echo-failure is the count of consecutive echo ...
2018/08/30 · Means if you set it to 0 in LuCI, option keepalive will be deleted. When no option keepalive is present, $lcp_failure will end up being empty ...
I have a TD-W8980 that I connect to my ISP using PPPOE. I periodically get a problem that the link stops working but can be re-established by disconnecting and ...
2022/10/18 · Hello, My PPPoE connection restarted and I found this in the system log: No response to 5 echo-requests. Serial link appears to be ...
I set the Echo request interval to 1 and using a packet sniffer, when the link fails I can see the Requests going out but there are no replies. Is it possible ...
This latest failure however I was able to capture a tcpdump file, for eth0 (WAN interface), for about 4 minutes leading up to the disconnection. There was ...
interval seconds: Specifies the interval for sending LCP echo packets, in the range of 1 to 10 seconds. The default value is 10 seconds. Usage guidelines. This ...
2023/07/14 · If the LCP echo interval is too high or misconfigured, it can lead to intermittent connection drops or connectivity issues. Here's how you can ...
2023/05/13 · Hi All Problem with PPPoE - FTTP - OpenReach ONT -> Citylink Intermittent loss of internet, shows initially as this - 3 fails in the last 2 ...