To configure the bridge priority, use the command spanning-tree mst priority in the Global Configuration mode. To restore the default configuration, use the no form of the command. The value of bridge priority must be the multiple of 4096. A switch with the lowest priority is the root of the STP topology.
関連する質問
What is the priority value of spanning tree MST?
Why is spanning tree priority 4096?
What is the default priority of STP?
What is the priority of spanning ports?
2019/10/04 · spanning tree mst o root: This command will check priority and change self priority lower than others and become root. but a letter on, If you ...
Multiple Spanning Tree protocol supports port cost tuning and interface priority by using the interface command 'spanning-tree mst <instance-number> cost <cost> ...
We'll have to change the priority for the IST (Internal Spanning Tree): SW1(config)#spanning-tree mst 0 priority 4096. This is how I change the priority for MST ...
2015/03/21 · Configures the priority for an MST instance. Step 2. Switch(config)# spanning-tree mst X root [primary | secondary]. Configures the bridge ...
The priority range is 0 to 61440 in increments of 4096. The default is 32768. The lower the number the more likely the switch will be chosen as the root switch.
Configures the switch (bridge) priority for the designated region in which the switch resides. The switch compares this priority with the priorities of other ...
Setting the priority for a port in a specified MST instance. Syntax: spanning-tree instance <1..4 port-list> priority ...
Sets the switch priority for the specified MST instance. The no form of this command sets the priority for the specified instance to the default of 8. Parameter.
2021/02/21 · The priority value must be a multiple of 4096. The switch and/or MST Instance with the lowest priority is the root of the spanning tree. The ...