2019/07/19 · The Luci-displayed default is 5 seconds for LCP echo-interval, which was why I thought the default values might be the wrong way around. The ...
関連する質問
What is lcp echo?
What is the echo request interval 0?
2018/08/30 · Means if you set it to 0 in LuCI, option keepalive will be deleted. When no option keepalive is present, $lcp_failure will end up being empty ...
The lcp-echo-interval is the time in seconds between echo requests (when the link "appears" to be idle). lcp-echo-failure is the count of consecutive echo ...
2022/10/18 · Hello, My PPPoE connection restarted and I found this in the system log: No response to 5 echo-requests. Serial link appears to be ...
interval seconds: Specifies the interval for sending LCP echo packets, in the range of 1 to 10 seconds. The default value is 10 seconds. Usage guidelines. This ...
I have a TD-W8980 that I connect to my ISP using PPPOE. I periodically get a problem that the link stops working but can be re-established by disconnecting and ...
This latest failure however I was able to capture a tcpdump file, for eth0 (WAN interface), for about 4 minutes leading up to the disconnection. There was ...
2023/05/13 · Hi All Problem with PPPoE - FTTP - OpenReach ONT -> Citylink Intermittent loss of internet, shows initially as this - 3 fails in the last 2 ...
Normally # I don't use them # #lcp-echo-interval 30 # See if the server is alive # every 30 seconds #lcp-echo-failure 2 # and quit if it's not alive # after ...
lcp-echo-failure n If this option is given, pppd will presume the peer to be dead if n LCP echo-requests are sent without receiving a valid LCP echo-reply.