2022/09/01 · The IDENTIFY_DEVICE_DATA structure contains the data retrieved by an ATA identify device data command (0xEC).
関連する質問
What does an ATA device do?
What is the ATA standard acs3?
What ATA command is used for?
What are Serial ATA SATA devices?
2024/05/07 · This provides a common command set for systems manufacturers, system integrators, software suppliers, and suppliers of storage devices.
ATAPI uses a very small number of ATA commands. The most important are the PACKET command (0xA0), and IDENTIFY PACKET DEVICE (0xA1). Contents.
This utility sends either an ATA IDENTIFY DEVICE command or an ATA IDENTIFY PACKET DEVICE command to DEVICE and outputs the response. The devices that respond ...
The IDENTIFY DEVICE command returns a 512‑byte data structure to the host that describes device‑specific information and capabilities. The host issues the ...
2020/02/19 · Possibility 1 is that the kernel patches are wrong, 2 that kernel now emits correct sense data which were previously slightly wrong or format ...
2013/07/08 · Identify which cable, ata2 and ata9 are on. Step 1 - Identify the ATA hosts. grep '[0-9]' /sys/class/scsi_host/host{0..9}/unique_id - from ...
2012/06/15 · Hi All, (Kindly guide me if I am at wrong place). My aim is to detect Solid State Drives in systems with raid configuration.
2011/03/08 · When a Linux box gets an ATA error, it syslogs it with a message identifying the disk as "ata%d.00". How do I translate that to a device name (eg /dev/sdb )?
2017/09/03 · An ATAPI will purposely fail an ATA IDENTIFY, therefore if you send the ATA IDENTIFY and it is successful, you know you have an ATA only device.