interval seconds: Specifies the interval for sending LCP echo packets, in the range of 1 to 10 seconds. The default value is 10 seconds. Usage guidelines. This ...
関連する質問
What is LCP echo interval?
What is an lcp echo request?
2019/07/19 · The Luci-displayed default is 5 seconds for LCP echo-interval, which was why I thought the default values might be the wrong way around. The ...
The lcp-echo-interval is the time in seconds between echo requests (when the link "appears" to be idle). lcp-echo-failure is the count of consecutive echo ...
2021/01/26 · - The default time interval in seconds between PPPoE Link Control Protocol (LCP) echo requests is 5sec and it could be modified between 0 to ...
2022/10/18 · Hello, My PPPoE connection restarted and I found this in the system log: No response to 5 echo-requests. Serial link appears to be ...
PPP LCP echo monitoring · Time: The time entered into the PPP list must be multiplied by the factor 10 to arrive at the actual interval between two LCP requests.
2017/08/14 · I've no idea. But this got me wondering. What are the recommended PPP LCP Echo settings for DSL connections. Any thoughts? ... The lcp-echo- ...
2020/03/19 · It seems that when the connection bandwidth is maxed out for just a few minutes, the LCP Echo is not being sent/received properly and it ...
2018/08/30 · Means if you set it to 0 in LuCI, option keepalive will be deleted. When no option keepalive is present, $lcp_failure will end up being empty ...
According to other examples on the Internet, modifying the lcp-echo interval and lcp-echo failure of PPP can solve the problem. But, there is no interface for ...