Previous
Use the “ifconfig” command to configure the Ethernet interface, and the TCP/IP (IP address, subnet mask, broadcast address, default gateway address) for the printer.
Reference
msh> ifconfig
Configuration
msh> ifconfig interface_name parameter address
Interface name |
Interface to be configured |
|---|---|
ether |
Ethernet interface*1 |
*1 If you did not enter an interface name, it will automatically be set to the Ethernet interface.
Parameter |
Meaning |
|---|---|
(no parameter) |
IP address |
netmask |
subnet mask |
broadcast |
broadcast address |
This affects the configuration of the network interface module on the IP address used.
To enter an address using hexadecimal, prefix it with “0x”.
