Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
MPT(4)			    Kernel Interfaces Manual			MPT(4)

NAME
       mpt -- LSI Fusion-MPT SCSI/Fibre	Channel	driver

SYNOPSIS
       To  compile  this  driver into the kernel, place	the following lines in
       your kernel configuration file:

	     device scbus
	     device mpt

       Alternatively, to load the driver as a module at	boot time,  place  the
       following line in loader.conf(5):

	     mpt_load="YES"

DESCRIPTION
       The  mpt	driver provides	support	for the	LSI Logic Fusion-MPT family of
       SCSI, Fibre Channel and SAS controllers.

HARDWARE
       The following controllers are supported by the mpt driver:

          LSI Logic 53c1030, LSI Logic	LSI2x320-X (Single and	Dual  Ultra320
	   SCSI)
          LSI Logic AS1064, LSI Logic AS1068 (SAS/SATA)
          LSI Logic FC909 (1Gb/s Fibre	Channel)
          LSI Logic FC909A (Dual 1Gb/s	Fibre Channel)
          LSI Logic FC919, LSI	Logic 7102XP-LC	(Single	2Gb/s Fibre Channel)
          LSI	Logic FC929, LSI Logic FC929X, LSI Logic 7202XP-LC (Dual 2Gb/s
	   Fibre Channel)
          LSI Logic FC949X (Dual 4Gb/s	Fibre Channel)
          LSI Logic FC949E, LSI  Logic	 FC949ES  (Dual	 4Gb/s	Fibre  Channel
	   PCI-Express)

       The  Ultra 320 SCSI controller chips supported by the mpt driver	can be
       found onboard on	many systems including:

          Dell	PowerEdge 1750 through 2850
          IBM eServer xSeries 335

       These systems also contain Integrated  RAID  Mirroring  and  Integrated
       RAID Mirroring Enhanced which this driver also supports.

       The SAS controller chips	are also present on many new AMD/Opteron based
       systems,	 like  the Sun 4100.  Note that	this controller	can drive both
       SAS and SATA drives or a	mix of them at the same	time.  The  Integrated
       RAID  Mirroring	available for these controllers	is poorly supported at
       best.

       The Fibre Channel controller chipset are	supported by a	broad  variety
       of  speeds  and	systems.   The	Apple Fibre Channel HBA	is in fact the
       FC949ES card.

       This driver also	supports target	mode for Fibre	Channel	 cards.	  This
       support	may be enabled by setting the desired role of the core via the
       LSI Logic firmware utility that establishes what	 roles	the  card  can
       take on - no separate compilation is required.

WARNINGS
       Most controllers	supported by the mpt driver suffer from	limitations on
       supported  disk	size (mostly <2TB).  While most	controllers will trun-
       cate usable disk	size, others might behave unexpectedly and  can	 cause
       severe  data  loss.  Refer to the datasheet of the chipset and firmware
       version for information about supported disk size and limitations.

SEE ALSO
       cd(4),  ch(4),  da(4),  mps(4),	pci(4),	  sa(4),   scsi(4),   targ(4),
       gmultipath(8), mptutil(8)

       LSI Logic Website, http://www.lsi.com/.

HISTORY
       The mpt driver first appeared in	FreeBSD	4.6.

AUTHORS
       The  mpt	 driver	 was originally	written	for FreeBSD by Greg Ansley and
       marginally improved upon	by Matt	Jacob <mjacob@FreeBSD.org>.

       Justin Gibbs <gibbs@FreeBSD.org>	and  Scott  Long  <scottl@FreeBSD.org>
       have made more substantial improvements.

FreeBSD	13.2		       January 16, 2021				MPT(4)

NAME | SYNOPSIS | DESCRIPTION | HARDWARE | WARNINGS | SEE ALSO | HISTORY | AUTHORS

Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=mpt&sektion=4&manpath=FreeBSD+14.0-RELEASE+and+Ports>

home | help