About the Audio-Technica AT-VM95E
An accurate budget stylus
The Audio-Technica AT-VM95E features a carefully shaped elliptical stylus, which is hard to find at this price point. It tracks record grooves with high accuracy for outstanding audio reproduction. It's designed to fit a standard 1/2" mount for compatibility with a wide range of turntables.
Product highlights:
- dual moving magnet design for excellent stereo separation
- 0.3 x 0.7 mil elliptical stylus
- aluminum cantilever
- frequency response 20-22,000 Hz
- output voltage: 4.0 mV
- stereo separation: 20 dB
- channel balance: 2.0 dB
- tracking force range: 1.8-2.2 grams
- recommended tracking force: 2.0 grams
- load impedance: 47k ohms
Dimensions and warranty:
- 3/4"W x 11/16"H x 1-1/4"D
- cartridge weight: 6.1 grams
- warranty: 1 year
- MFR # AT-VM95E
What's in the box:
- Dual moving magnet stereo phono cartridge
- Two 11mm screws
- Two 8mm screws
- 2 Washers
- User Manual
- Disposal Note
Customer reviews for Audio-Technica AT-VM95E
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Audio-Technica AT-VM95E
Features & specs
Type | MM | |
Mounting | Standard | |
Stylus shape | Elliptical | |
Frequency response (Hz) | 20-22k | |
Tracking grams | 2.0 | |
Stereo separation (dB) | 20 | |
Output voltage (mV) | 4.0 | |
Load Impedance (Ohms) | 47,000 | |
Load Capacitance (pF) | 100-200 |
Product Research
Features
Dual Moving Magnet Stereo Cartridge: The Audio-Technica AT-VM95E with 0.3 x 0.7 mil elliptical stylus fits half-inch mount turntables. The cartridge's special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws (no nuts required). Since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.
- VM95 Series dual magnet cartridge with 0.3 x 0.7 mil elliptical stylus
- Aluminum cantilever
- Specially wound coils increase output voltage
- Durable low-resonance polymer housing
- Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws - no nuts required
- Compatible with any AT-VMN95 replacement stylus
Specifications:
- Frequency Response: 20-22,000 Hz
- Channel Separation: 20 dB (1 kHz)
- Vertical Tracking Force: 1.8-2.2 g (2.0 g standard)
- Stylus Construction: Bonded round shank
- Recommended Load Impedance: 47,000 ohms
- Output: 4.0 mV (at 1 kHz, 5 cm/sec)
- Channel Balance: 2.0 dB (1 kHz)
- Stylus Shape: 0.3 x 0.7 mil elliptical
- Cantilever: Aluminum pipe
- Mount: 1/2"
- Replacement Stylus: Part # AT-VMN95E
- Coil Impedance: 3,300 ohms (1 kHz)
- DC Resistance: 485 ohms
- Load Capacitance: 100-200 pF
- Coil Inductance: 550 mH (1 kHz)
- Static Compliance: 17 x 10-6 cm/dyne
- Dynamic Compliance: 7 x 10-6 cm/dyne (100 Hz)
- Vertical Tracking Angle: 23°
Dimensions: 0.75" (w) x 0.6875" (h) x 1.1875" (d)
Weight: 6.1 g (0.22 oz)
Loading...
Loading accessories...
Customer Q&A
1 question already asked
Loading...
Loading articles...
Actually, I bought this by mistake. I wanted to change my stylus so I bought this cartridge. Before I installed it I discovered how easy it was to just change the stylus. What a great system. So I just used the stylus to keep the process simple and I am very pleased with this product.
Chris from Frankfort, IL