新しい会話を開始

Solved!

ソリューションへ移動

1 Rookie

 • 

73 メッセージ

30

2024年2月27日 06:13

PowerVaultME5のShutdownコマンドについて

PowerVaultME5のShutdownコマンドは実行後にy/nを入力しなければならないと思うのですが、

強制的に実行(対話形式をスルー)することはできないでしょうか。

Moderator

 • 

6.5K メッセージ

2024年2月28日 03:35

keijirouさん

コマンドレファレンスガイドでも、また実機でのHelpを見ても
shutdownコマンドには強制的に実行するというオプションはなさそうです。
アクセスへの問題が危惧されるためにあえて確認する形での構造になっている
のではないでしょうか・・


Shutdwonをスクリプト化したいというお問い合わせに対してもスクリプト内での
変更を入れることを示唆する(send \"y\n\")対応履歴があったので -fオプションのようなものは
Me5のコマンドにはないとみていいと思います。

 

参考:Dell PowerVault ME5 Series Storage System CLI Reference Guide

Page 292 shutdown

 

実機でのHelp>

# help shutdown
shutdown
DESCRIPTION
Shuts down the Storage Controller in a controller module.

This ensures that a proper failover sequence is used, which includes stopping all I/O operations and writing any data in write cache to disk.

Caution: Performing a shut down will cause data to be unavailable from the Storage Controller that is shut down. If the Storage Controller in each controller module is shut down, hosts cannot access the system's data.

Perform a shut down before removing a controller module or powering down the system.

MINIMUM ROLE
standard

SYNTAX
shutdown
[a|b|both]
PARAMETERS
a|b|both

Optional. Specifies to shut down the Storage Controller in controller A, B, or both. If this parameter is omitted, the command affects the controller being accessed.

EXAMPLES

Shut down the Storage Controller in controller A.
  # shutdown a

1 Rookie

 • 

73 メッセージ

2024年3月5日 02:10

@ayas​ さん。

回答ありがとうございます。

forceオプションが無い事、承知致しました。

コマンドを利用したシャットダウンを考えていたのですが、

別途対応方法を検討することにします。

イベントは見つかりませんでした!

Top