Protech Technologies SDI-76XL-MW-DIR Outdoor Motion Sensor with Direction Control, Microwave, Directional, Wide Angle, 50'

• Directional Sensor
• Wide Angle Lens
• 50 ft.
• STEREO DOPPLER MICROWAVE DETECTOR: Two receiving channels with the ability to eliminate vibration and periodically moving objects as sources of false alarms.
• DUAL ELEMENT INFRARED DETECTOR: Ignores normal temperature variations yet is very responsive to rapid infrared changes created by an intruder.
• BALANCED TEMPERATURE COMPENSATION: Stereo Doppler Microwave and Passive Infrared portions automatically adjust detection parameters to compensate for losses in range that occur at elevated temperatures.
• MICROPROCESSOR CONTROLLED: Proprietary integrated circuit design provides enhanced digital signal processing for both microwave and passive infrared technologies.
• STEREO DOPPLER SUPERVISION: A component failure will cause the sensor to lock-in alarm.
• DIRECTION CONTROL SWITCH: A Three-position digital switch that controls the direction of movement required for a sensor alarm. The sensor can be set in one of three modes: 1. Detect only approaching movement, 2. Detect only receding movement and 3. Detect both approaching and receding movement.DIGITAL RANGE CONTROL: Ten-position digital switch adjusts how far the sensor detects (to its maximum range).
• DIGITAL SENSITIVITY CONTROL: Ten-position digital switch adjusts the amount of movement required to initiate an alarm condition.
• MASTER LED: Displayed on the face of the unit indicating the alarm relay status.
• ANALYTIC LEDS: Alarm and Environmental Caution LEDs for both technologies displayed on the face of the sensor. An internal switch can disable both Master and Analytic LEDs.
• WALK-TEST SOUNDER: Optional audible tester to assist in the walk-test and initial sensor setup. The XL-Sounder greatly simplifies the installation as it enables walk-testing and adjustment by a single installer.
• SWIVEL MOUNTING: 180 Horizontal Adjustment, 90 Vertical Adjustment.
• TAMPER-PROOF: Tamper switch with terminal connection.
• ALL SOLID STATE RELAY: User selectable Form C relay output. A Solid State relay is flexible, silent and more reliable than an electromechanical relay.
• METAL RAINTIGHT HOUSING: Rugged, weatherproof housing offers maximum protection against RFI and EMI interference.
• WEATHER SHROUD: Metal hood that routes rain from sensors face and also provides maximum protection from ice, snow, wind and sun loading.

• Input Voltage: 8.5 to 20 VDC
• Current Consumption: 150 mA @ 12 VDC (LEDs off)
• RF Power Density: 120 uW/cm2 max at the face of the unit
• Operating Temperature: -30F to 130F -34C to 54C
• Maximum Camera Dimensions: 5.5 L x 2.25 W x 3.25 H
• Relay contact Rating: 0.1A, 50 V
• Housing Dimensions: 6 1/4 L x 5 1/4 W x 3 1/2 H
• Shroud Dimensions: 9 1/4 L x 6 W x 4 1/4 H
• Frequency: 10,525 MHz USA, 10,587 MHz International, 9,900 MHz International, 9,470 MHz International