Page 1
Bluetooth GPS Receiver BT-359 User Manual http://www.manuallib.com/file/2551103 From ManualLib.com ManualLib.com collects and classifies the global product instrunction manuals to help users access anytime and anywhere, helping users make better use of products. Home: http://www.manuallib.com/ Chinese: http://www.shuomingshuku.com/ This Manual: http://www.manuallib.com/file/2551103...
Page 2
User Manual Bluetooth GPS Receiver BT-359 Ver 1.1 This Manual: http://www.manuallib.com/file/2551103...
Page 3
1. BT-359 at a glance Appearance and Function 1. Bluetooth Status LED 2. GPS Status LED 3. Power LED 4. Power Button How to change battery Accessories Car charger BT-359 USB cable Travel charge adapter (optional) This Manual: http://www.manuallib.com/file/2551103...
LED off ---- Battery is partially full or fully charged. 2.4 Power-saving Function When you start the power of the Bluetooth GPS Receiver BT-359, if the Bluetooth is not connected to any devices within 10 minutes, BT-359 will turn off the power automatically, and all the LED will go off simultaneously.
GPS. Auto Shut-Off Override Switch This feature is not found on all models of the BT-359 and is usually not required by most users. However, for those who may have applications that require an override to the Auto Shut-Off feature to keep the BT-359 powered at all times regardless of...
3. Specification System Specification Electrical Characteristics GPS standard SiRF StarⅢ GPS Antenna Built-in ceramic patch antenna Bluetooth standard Bluetooth V2.0 Operation range 10 meters (33 feet) Bluetooth Default PIN 0000 Operation time Up to 11 hrs Charge time 4~5 hrs Auto Shut-Off When no active Bluetooth connection has been detected within 10 minutes.
GPS Specification Electrical Characteristics GPS Chipset SiRF Star III Frequency L1, 1575.42 MHz C/A Code 1.023 MHz chip rate Channels 20 channel all-in-view tracking ACCURACY Position Horizontal 10 meters, 2D RMS 1-5 meters 2D RMS, WAAS corrected Velocity 0.1m/sec Time 1 micro-second synchronized to GPS time DATUM Datum...
Page 8
1. Turn on the power switch in BT-359. 2. Please refer to the user manual of Bluetooth Compact Flash card to enable it to connect with the BT-359. Some Bluetooth devices may need the Bluetooth passkey, the passkey is “0000”.
5. How to test your Bluetooth GPS Receiver? The testing program only supports the Microsoft Windows CE & Pocket PC based PDA platform. 1. Run the “GPSinfo.exe” to execute the installation procedure of testing program (via PC and ActiveSync). 2. Run the “GPS Information” program from “Start → Program files” of PDA. Here is the description of “GPS Information”...
Page 10
This Manual: http://www.manuallib.com/file/2551103...
Will the GPS work with other Street Mapping software? Globalsat GPS receivers provide standard NMEA data for mapping software to use and convert to coordinates and should work well with most any NMEA compliant software on the market today.
If your PC is on and the COM port was configured properly, the GPS receiver is on and receiving the streaming GPS data. This can be verified by opening your mapping software program. In addition, the Globalsat GPS has a built-in LED status indicator that shows the following: LED OFF: GPS receiver is off (no power).